skip to main content

Listen

Read

Watch

Schedules

Programs

Events

Give

Account

Donation Heart Ribbon

Why Is It So Hard To Make A 100 Percent American Hand Dryer?

The Xlerator hand dryer is made almost entirely of American components and assembled in Massachusetts. But the company's owner says it's simply not cost-effective to use an American-made motor.

Bill, Nancy and Denis Gagnon (from left), who turned Excel Dryer into a globally competitive business. Denis Gagnon says he will never relocate production offshore.

Fifteen years ago, Denis Gagnon bought a company that made a product nobody really liked: hand dryers. But he quickly managed to turn Massachusetts-based Excel Dryer into an innovator with the Xlerator -- a high-speed dryer that cut drying time from more than 30 seconds to less than 15.

The Xlerator, assembled at a plant in East Longmeadow, is "Made in USA Certified" -- meaning at least 75 percent of the product is made of U.S. content. The foundries that cast most of its components are American, and the control boards are assembled locally. Excel polishes and electroplates the dryers in-house, and, in teams of four, builds the components into a working dryer.

Today, Excel Dryer is 12 times larger than it was in its pre-Xlerator days. It's kept 38 manufacturing jobs in the U.S. through some creative research and development, including a shop of retired MIT scientists who have invented things like an emergency flashlight, an automated shower and even a putter with an enlarged sweet spot.

So why is the motor inside the Xlerator -- part of that remaining 25 percent -- not made in the U.S.? Why does it come from a company in Hong Kong?

"What we need to do to be cost effective is to source a motor that's used in more than one industry, and then tailor-make a couple adjustments to make it fit our product," Gagnon tells All Things Considered host Robert Siegel. "That's the only way we can cost effectively do it."

Johnson Electric: American Name, Asian Company

The company that makes the Xlerator's motor, Johnson Electric, has a very American-sounding name and an office in Shelton, Conn. But it's very much an Asian company that's traded on the Hong Kong Stock Exchange. And in the world of small motors, it is a big, big player.

According to Johnson Electric's website, the company makes motors for kitchen appliances, hair dryers, toothbrushes, power tools, printers, DVD players, copiers and vending machines. For cars, the company makes door locks, mirrors, wipers, washers, brakes, radiator fans and fuel pumps.

Gagnon employs 38 people on his factory floor. In contrast, Johnson Electric's 2012 annual report says the company's "global headcount including contract employees is approximately 38,000 people."

As a small business, Gagnon says his best deal was getting Johnson Electric to adapt one of its many motors to the Xlerator's specs.

"Tooling up a special motor for Xlerator, when we didn't know if we even had a product, was kinda out of the question at the time," Gagnon says. "We settled in on a high-volume motor that they could make some adaptations to. And frankly, that turned out to be good decision."

East Asia, A Small-Motor Powerhouse

Johnson Electric is one of two major players in nonindustrial motors, along with a Japan-based company, says Alex Chausovsky, who follows the motor business for the market intelligence firm IHS.

Almost all the small motors in virtually every motor-powered consumer product come from the region, he says -- from the vibration motors in cellphones to hair dryers and microwaves.

Johnson Electric and its major competitor, Japan's Mabuchi, can keep their products inexpensive in large part because of economies of scale. Both companies, Chausovsky says, "make in excess of a million motors per day."

Low labor costs in Asia are also a critical factor, Chausovsky says, although they're not as low as they were five or 10 years ago. And as those costs have grown -- particularly in China -- this type of manufacturing has begun to spread to places like Mexico, Poland and the Czech Republic.

"But the fact that many years ago labor costs were significantly lower allowed them to establish those economies of scale," he says -- meaning it still makes sense for the bulk of small-motor manufacturing to continue in Asia, at least for now.

Back at Excel Dryer, Gagnon says whatever greater savings his company might enjoy by manufacturing the entire Xlerator overseas, it's not a choice he's willing to make.

"[It will] never happen on my watch. I've expanded this facility twice; I have no intention of ever relocating the manufacturing offshore," he says. "We'll be smart enough to make it here in the United States."

Copyright 2013 NPR. To see more, visit www.npr.org.

We've upgraded to a better commenting experience!
Log in with your social profile or create a Disqus account.

Please stay on topic and be as concise as possible. Leaving a comment means you agree to our Community Discussion Rules. We like civilized discourse. We don't like spam, lying, profanity, harassment or personal attacks.

comments powered by Disqus